版权
COPYRIGHT © 2018 Yantai Auto Instrument Group Co.,Ltd.
AT2088 Economic Type diffusion sillicon Pressure Transmitter
AT2088 Economic Type Pressure Transmitter
Product Description
SP series pressure transmitter is the introduction of foreign technology and products produced using imported components, can be used to process fluid (liquid, gas) measured continuously changes. Will be converted into a 4-20mA standard current measured pressure signal output, and combined with othermonitoring and control units, constitute automatic control system. Widely used in petroleum, chemical,metallurgy, electricity, medicine, beer, water treatment and other industries process monitoring and control.
Technical Parameter
|
Accuracy |
0.2%FS,0.5%FS |
|
Stability |
Better than 0.25%FS annually |
|
Installation location influence |
No impact |
|
Temperature influence(-50~50℃) |
Less ±0.15%/10℃ |
|
Working voltage |
15V~30V DC |
|
Ambient temperature |
-20~85℃ |
|
Medium temperature |
-40~120℃ |
|
Storage temperature |
-40~110℃ |
|
Compensation temperature |
-15~50℃ |
|
Wetted diaphragm |
SS316L, ceramic |
|
Process connection element |
Stainless steel |
|
Sealing element |
fluororubber |
|
Shell/housing |
Plastic,molded cast aluminium, aluminium alloy |
|
Protection |
IP65 |
Order sheet
|
Name |
Specification code |
Explanation |
|
sp |
|
Pressure Transmitter |
|
Process Connection Material |
1 |
Stainless Steel |
|
Process Connection Structure |
R |
external thread G1/2″ |
|
M |
external thread M20×1.5 |
|
|
Y |
Customize |
|
|
Sealing Material |
IF |
fluoro rubber（standard） |
|
IH |
fluoro rubber applied to Sensors(Over 10MPa) |
|
|
Electronic Components of Transmitters |
2 |
Analog signal 4-20mA (two wire) |
|
3 |
customize |
|
|
Shell material and structure |
A |
Aluminum shell PG16 cable sealingIP65 |
|
B |
Stainless steel shell cylinder structure |
Work shop
